CALL: 0418 882 678
Book your floors for APRIL and receive a 10% discount

Post Tag - Floor sanding brisbane Page 1

Staining New Flooring to Match Colour of Old flooring

The existing timber flooring in this house was previously polished, Cypress Pine. As part of a home renovation, the total floor area was increased by laying new pine flooring into the extension. As is often the case with new timber flooring, the wooden floorboards can be lighter in colour and this would have been obviously

Timber Floor Board Replacement and Staining

This old timber pine floor in a New Farmhouse had many timber floorboards that had been previously infected with timber borer. This often compromises the structural integrity of the timber floorboard and also renders the floorboard unpleasant in appearance. Firstly the timber floor is sanded back and any damaged floorboards are identified for replacement. The

Trades are Essential Services-We are Open for Business

Trade services REMAIN on the Governments ESSENTIAL SERVICES list during the COVID-19 crisis. No Federal- Level bans apply to Trade services and they have not been added to the restricted services list. Budget Floor Sanding Brisbane is open for business and we are ready to transform your timber floors into your home’s most outstanding feature.

Timber Floor Sanding and Repairs

The owners of this old Tasmanian Blue Gum mosaic parquetry floor wanted their timber floor re-sanded and polished for a couple of reasons. Firstly they did not like the way that the old polyurethane coating had gone yellow with age and secondly re-modeling of the kitchen had exposed areas of flooring not currently laid with

Floor Finishing with Satin Polyurethane Finish

There was a time when customer expectation was that a polished timber floor must be glossy, and the glossier the better. Now, however, the lower sheen satin timber floor Polyurethane finishes are very popular. There are a few reasons for this. Firstly it can be argued that the satin timber floor finishes are more forgiving. Any

Staining of American Oak Timber Stairs

American Oak timber floors have become more popular around Brisbane lately, especially in homes where a Hampton style is desired. Recently Budget Floor Sanding completed the floor sanding and polishing of three sets of timber stairs in three new homes at Clayfield. The timber stairs had been installed with American Oak feature stair treads. The

Floor Sanding and Polishing with Loba Invisible Protect

Do you want your floor to look natural like it is raw timber that has the appearance of having never been coated? If you don’t want your floor to look as if it has a plastic layer on top of the timber and for it not to change color and yellow with age, Loba Invisible

Floor Board Repair with Sanding and Polishing

Budget Floor Sanding Brisbane recently attended this home in Fairfield that required timber floorboard repairs, followed by floor sanding and polishing. The spotted gum hardwood timber floors had suffered water damage to the floor due to waterproofing issues in the bathroom. Over time the water ingress had damaged the timber flooring. To repair the water

American Oak Flooring Finished with Loba Invisible Protect

Our latest floor sanding Brisbane project was this new house in Balmoral. The homeowners chose American Oak tongue and groove flooring in a wider 180 mm width. Budget Floor Sanding Brisbane was contracted by the builder to install the timber flooring. With a wide profile floor such as this, the timber was fully glued to

Spotted Gum Flooring Finished with Loba Water Base Finish

New Spotted Gum Timber flooring was installed on the upstairs and downstairs levels at a recently built new house at Cannon Hill. A decorative Spotted Gum timber parquetry floor had been laid in the entry as a standout feature of this new home. It was the owner’s desire to have the wooden floor looking as

↑ Top of Page